Farmall A Oil Gauge Question

mrf-engines · Dec 9, 2013

Hello again. I am looking to replace the aftermarket generic gauges on my A with reproduction gauges. I see the oil ones come in two different ranges, 0-15 psi and 0 - 75 psi. Which one is the correct one for a 45 farmall a? We use this tractor as well as show it.

Thank you.

Tom Fleming · Dec 9, 2013

The higher range is correct for the letter series. I would suggest that you contact Joe's Farmall parts. He is Gordon Rice's son, and sell parts for the letter series. He is out of Clarion, Pa. I believe that this site sells gauges as well.

The F series used the lower pressure gauges, except for the F12/F14 which used the higher pressure gauge.

The reason was, that the Regular, F-20, and F-30 engines were mainly splash lubed. The F12/F14 were pressure lubricated, as well as all the letter series.

gene bender · Dec 9, 2013

Original does not have numbers on the guage zones in color red on left and rest is white says oil on the guage.

old · Dec 9, 2013

Gene is right no numbers just words on them. Shoot I may still have a good one laying around that came off an A or B. That said nnalert has them listed and are the correct reproduction

MRF-Envines · Dec 9, 2013

Thank you all for the input. The ones I had found were the original style, no numbers, but had different ranges listed in the specs. Just wanted to make sure I got the right one. Thank you!

old · Dec 9, 2013

The one on my BA which is half B and half A has a red area and a white area and that is all and says oil under that area

Farmall A Oil Gauge Question

mrf-engines

Member

Tom Fleming

Well-known Member

gene bender

Well-known Member

old

Well-known Member

MRF-Envines

New User

old

Well-known Member

Similar threads