(800) 853-2651
SHOP NOW

farmall c block #

did IHmake a sleeveless block for a swather or? ive seen a super c with a block that starts with 2....its in a puller tractor and I know it has 3.5"piston
 
251069 r1 was thermosiphon Super A. It could work.

Hal helped with my build and he is right on the block #, also a 366204 block number will work too.
I've probably looked at 50 Farmall blocks and have documented their locations.
240 block is not the same as a Super C ,200,230. It will mate up ,but the front of the block is different, the crank is different and the pulley is different.
 
Here's a 251069r1 block on ebay that the seller claims came from a C. Seems plausible, based on the pics it doesn't look bad, has it's bearing caps and no tell-tale signs of leaking anti-freeze coming from the infamous freeze crack. The paint looks old enough that it should show up, you never can tell if the freeze crack is there until you magnaflux the block. I've seen it first hand.

http://www.ebay.com/itm/Farmall-C-tractor-original-IH-engine-motor-block-IH-Part-251069R1-Head-Bolts-/370942919229
 
ok thank you.so the beginning number that starts with a 2 is from a SUPER A. ARE THEY SLEEVELESS AND WILL 3.5" PISTON FIT IN.
 
You must log in or register to reply here.

Similar threads

G
1946 m with engine casting letter G
Replies
10
Views
470
BarnyardEngineering
BarnyardEngineering
G
C264 SUPER M BLOCK
Replies
7
Views
533
caterpillar guy
C
M
D-361 C1 Block
Replies
4
Views
421
J.Wondergem
J.Wondergem
H
Farmall 544 Gas C-200 Valve Clearance?
Replies
7
Views
264
Dieseltech
D
S
484 with cab - heater hoses connections
Replies
1
Views
174
used red MN
U
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top