voltage regulator wiring

Anonymous-0 · Nov 30, 2013

Can someone please help me (in really simple terms) as to how to wire a new style voltage regulator onto an old style generator on a Farmall H 6 volt. It has the curved base that sits right on top of the generator. It has three prongs on side labeled B, L, and F and one prong in middle of the bottom. What do I wire to where? Thanks for any and all help. Have always had luck with this site in the past.

Janicholson · Nov 30, 2013

The F terminal hooks to the "F" terminal of the generator.
The B terminal hooks to the amp gauge, on the side not connected to the starter switch, with a #10 wire.
The L hooks to the fuse input terminal for the light circuit. (10 gauge is also good)
The No name goes to the "A" terminal on the gen.
Jim

Anonymous-0 · Nov 30, 2013

Thank you so much Jim for this information. It is just what I needed in a way I could understand it. That is much appreciated. Patti

Janicholson · Nov 30, 2013

You are Welcome. These will Help. Jim
John T system analysis

Bob M diagrams

voltage regulator wiring

Anonymous-0

Well-known Member

Janicholson

Well-known Member

Anonymous-0

Well-known Member

Janicholson

Well-known Member

Similar threads