Putting on front blade on Farmall C

BigBob706 · Nov 27, 2013

I took my blade off in the summer and i want to put it back on for winter. I was wondering if there was an easy way to put it back on. Its heavy and looks like a 3 person job!

Here is picture with it on when i got it!

BigBob706 · Nov 27, 2013

My C with blade on it

Anonymous-0 · Nov 27, 2013

That is the first time I saw a tractor defie the law of gravidy.

TheDurk · Nov 27, 2013

(quoted from post at 18:47:21 11/27/13)
That is the first time I saw a tractor defie the law of gravidy.

No wonder he is having trouble installing that front blade.

D7fever · Nov 27, 2013

Your skids on the plow are supposed to mount on the rear of the blade, not on the front.
Probably should take the blade off the push bars, then when installing, just install the bars first, then when everything except the blade is mounted, drive up to the blade and mount that, won't have to pick it up then.

the tractor vet · Nov 28, 2013

Well it would help if ya turned the tractor wright side up first . and it would help with some close up pictures . . Now if the back spreader bar came off it would be easy with a floor jack or any small bottle jack. always work smart not harder .

gab · Nov 28, 2013

Mine doesn't have the lift linkage, just lay a 2x6 on each side of the cross member and drive over, slip a floor jack under the corner and raise to get a bolt started then use a punch and the jack to get the rest. 10 mins

Putting on front blade on Farmall C

BigBob706

Member

BigBob706

Member

Anonymous-0

Well-known Member

TheDurk

Member

D7fever

Member

the tractor vet

Well-known Member

gab

Well-known Member

Similar threads