1066 I/H

Leonard Dacus · Nov 18, 2013

I am trying to locate the 18 deg.BTDC timing mark on the flywheel. Found some timing marks, need help identifying witch one I need to use. one mark is longer assuming it to be TDC shorter marks precede it don't know what deg. each mark represent. my Manual is no help on this other than 18 deg. BTDC. injector pump problem trying to get crankshaft position before removing pump.

caseyc · Nov 18, 2013

It's gotta be there, never seen one without. Take a wire brush or a rag with some brake clean and clean the area, see if it shows up then...

Casey in SD

Larry B. 1486 · Nov 18, 2013

I have removed several IH pumps over the years. If you know how to line the marks up on the pump, line them up first and see what the mark shows on the flywheel. where ever the pointer is, kind clean up that area and see if it has numbers. If no marks show up on the flywheel you need to roll it over one more time that means its 180 out. If you see marks on the flywheel when the marks are lined up on the pump, pull it. Just don't touch the motor after you pull it and when you get it back make sure the pump marks are line up and bolt it on. Everything should be right where you pulled it off.

1066 I/H

Leonard Dacus

Member

caseyc

Member

Larry B. 1486

Member

Similar threads