(800) 853-2651
SHOP NOW

F-20 flywheel puller

D

Duanes

Member
Anybody have a picture of a puller they have used to pull the flywheel on a F-20? Or a brand and model number of a puller that will work?
 
I made one.Used a round chunk of 3/4" plate steel.Drilled 3 holes to match the holes on the flywheel.Took a long threaded 1" bolt.Welded a nut to the center of the plate.Bolt it down,turn the long bolt,flywheel will come off.But!,you must remove the small tapered 'pin' in the center.!
flywheel will NOT move if retaining pin is left in place.
 
Used a big Sears 2-armed puller with the arms thru the holes. After part way off, put a large socket as a spacer onder the center screw.
 
...
flywheel will NOT move if retaining pin is left in place.
Click to expand...

That is not true.

I have removed numerous F20, Regular, F30, and 10-20 flywheels and have never removed the key before pulling the flywheel. The key comes out with the flywheel and then it is a simple mater to knock it loose with a hammer and punch.
 
(quoted from post at 16:25:10 11/13/13)
...
flywheel will NOT move if retaining pin is left in place.
Click to expand...

That is not true.

I have removed numerous F20, Regular, F30, and 10-20 flywheels and have never removed the key before pulling the flywheel. The key comes out with the flywheel and then it is a simple mater to knock it loose with a hammer and punch.
Click to expand...


ditto

every single flywheel I remove has the key in place. I even leave it in there while I get them surfaced and put it back on just like it came. ive never touched one of those dowels
 
Did you get your flywheel off yet? I like DeltaReds idea of making a puller but I need to measure the spacing on the three bolt holes. charlie
 
You must log in or register to reply here.

Similar threads

C
Super C input shaft seal replacement
Replies
1
Views
131
Charlie M
C
J
Remove rear axle hub
Replies
15
Views
691
JohnAndrew
J
C
F-20
Replies
2
Views
258
Mark Poss
M
J
1939 F20
Replies
4
Views
358
DeltaRed
D
G
Cylinder Sleeve Removal Issues
Replies
2
Views
184
bmaverick
bmaverick
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top