farmall h front end

Anonymous-0 · Nov 13, 2013

I just purchased a 46 farmall h and i am happy with it except it has the single front wheel i like the more popular dual wheel style and am thinking of buying one , just wanted to see how much work is involved in changing it over. do i just change the pedestal or the whole bolster unit.

Zachary Hoyt · Nov 13, 2013

There are four bolts that hold the NF on, just below the casting. If you turn the wheels about 45 degrees you can get a wrench in there to hold the bolt heads. One bolt has a tall pin on the head to keep the wheels from turning too far, it just needs to go back in the same hole out of which it came.
Zach

rustcollector · Nov 13, 2013

steve,

Have front ends that I would swap for your single wheel & fork. Let me know if you don't find anything close to you. Tires not good on what I have.

jasinpa · Nov 13, 2013

i think i have 2 regular narrow fronts here im in cental Pa , if interested let me know ill look closer in the parts barn & can work a deal

Anonymous-0 · Nov 14, 2013

Make sure to attach front wheels with caster in proper direction. Had a neighbor who removed an M from under a cotton picker which operates in reverse direction and kept griping about how poorly his tractor drove once it was retuned to regular use. Discovered that he had not reversed the front wheels by 180 degrees to make caster in right direction.

Anonymous-0 · Nov 14, 2013

i am interested but i am in california and i think shipping would cost a small fortune .

farmall h front end

Anonymous-0

Well-known Member

Zachary Hoyt

Well-known Member

rustcollector

Member

jasinpa

Member

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

Similar threads