Farmall F12 motor

James Williams · Nov 12, 2013

I am getting ready to put a F12 motor together,and I noticed a hair line crack starting from the head bolt stud hole and going both ways to the bore and to the oil return slot.Do you think that if I copper coat both sides of the head gasket will this crack will caues likage.This motor has wet sleves and no water pump

jimmy

Oldiron29 · Nov 12, 2013

James had it run that way before you pulled it apart?? oldiron29

James Williams · Nov 12, 2013

I dont know,I could have done it when removing the head studs,I called a old tractor mechanic and took it out to the machine shop and both said they wouldnt worry about it,I think im going to put some JB weld on the stud threads and copper coat the head gasket

jimmy

Oldiron29 · Nov 12, 2013

Indian head shelic on the studs works good.

Farmall F12 motor

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

James Williams

Well-known Member

Oldiron29

Well-known Member

James Williams

Well-known Member

Oldiron29

Well-known Member

Similar threads