Adding suitcase weights to the 1586

Dave H (MI) · Nov 2, 2013

Looking at the manual and the tractor, looks like I have everything 'cept the angle iron. Looking around the usual places and not seeing one so I am looking at making one. Pictures in the manual not detailed. Is this just a long piece of angle steel with holes that match the weight bracket on the tractor? I have the bolts and cams.

IaGary · Nov 2, 2013

Dave H (MI) · Nov 2, 2013

OK...I have to cut you off there Gary, the weekend is only so long and I have a lot to do.

I notice the holes on the tractor mounting bracket are not holes. Guess I need to look at the book again.

IaGary · Nov 3, 2013

Just put a hole on each end, slide thru the weights and bolt it on.

I have never used the cam locks.

Gary

Dave H (MI) · Nov 3, 2013

Just came in. I was out there looking at it. Carried one of those weights over and put it on the bracket. Think my right arm is an inch longer than my left now. Anyway, I was thinking the same. Just two holes and snug it down.

Adding suitcase weights to the 1586

Dave H (MI)

Well-known Member

IaGary

Well-known Member

Dave H (MI)

Well-known Member

IaGary

Well-known Member

Dave H (MI)

Well-known Member

Similar threads