(800) 853-2651
SHOP NOW

4100 shifting issues

D

D1206

Member
I picked up a 4100 this summer,I'm having trouble getting it
into reverse.The lever moves freely,but most times just grinds
when in reverse position.It will go into reverse the odd
time,but it usually takes some time.It shifts into the other
ranges fine.The PO has passed on,so I can't ask him about it either.I have an IH service manual,but it doesn't have any info on adjustments or anything on linkages.Thanx in advance.
 
Now not being the local wizz kid here on the 4100's as i have only worked on one , more then likely it is the same as any 06-66 trator . So your problem can not be ADJUSTED out and will require REPAIR . So my best guestamation on this is that it will need a new range cover , maybe a new cam , a new rev. shift lever and maybe a new rev. shifting fork .
 
Cover can be machined for a bushing. The pivot is replaceable and then if the reverse fork is not worn or the key loose it should work fine unless the problem has ground the teeth off to the point it will not engage. The cam could also need replaced. Yes they work the same as the 4166 which is like the 06 series. If one of the rollers is missing it will act that way also.
 
You must log in or register to reply here.

Similar threads

A
TO30 Gears do not move when shifting
Replies
9
Views
396
AllanK
A
5
IH 434 tranny
Replies
10
Views
1K
550Doug
5
5
IH 434 tranny
Replies
2
Views
377
JimB2
J
D
Ford E4OD/4R100 transmission issues
Replies
12
Views
626
Bruce(OR)
B
F
IH 656 HydroDrive Issues
Replies
1
Views
616
E Lilley
E
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top