Super A plow depth control

Woodby

Member
Does anyone have the dimensions of the depth control linkage for this plow?
a132736.jpg
 
I found a collector who had it for sale, I needed it for my 50
demonstrator. I came home with the plow and a 52 Super A.
But I've done some research and have seen the Super A with
2 separate plows mounted, one lays off to the left and one to
the right.
 
Dad had a 47 Super A ..the chain hooked to the lift arm and the depth was set with the second touch control lever using a link attached to the front of the drawbar
 
What you have there is the left half of a model 189 2-way plow. Missing a lot of parts, including the right half, to make it complete.

It will certainly get the job done if all you are looking to do is plow a garden or something, but if you're looking for a "correct" implement for a parade tractor, that's not it.

If the wear parts are in good shape it could be valuable to someone who has a complete 2-way plow with a worn out left hand side.
 
The two way plow that you described is common in the flood/furrow areas.As was said,You only have half of it-the left half.
 
Thanks for the comments but back to the topic, does anyone have the dimensions to the depth control arm? I want to fabricate one
 
I have one for my SA that a friend fabricated for me off of pics and dimensions a poster on here sent me. I will try to get the measurements today. Do you have an email address to send them to?
Greg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top