(800) 853-2651
SHOP NOW

can someone tell me what im working with form the serial ...

F

FarmallKeith

New User
The Tractor serial number
FBK 115876XL
The motor serial number iS
FBKM 114526
Also I checked then head number
it is 8060 db.
I am chasing down problems I've
been having using This tractor
as a puller. Thank you keith
 
You have been pulling this tractor and you dont know if you have a H;M or ????Since you have the sn,the sn plate must still be there.The model will be on that plate
 
FBK = farmall M. FBKM = M engine. If both have X1 instead of XL after the serial number it means they were equipped for gasoline fuel. 8060DB is a gasoline head for a M. Would say it has original parts.
 
It's an M.

An M is such a simple tractor, though, that knowing it's an M really won't help you track down any problems you've been having. You'd have the same problems with a C or an H, and the solutions would be the same.
 
I know what the tractor is. I was.trying to find out if if the tractor was equipped high altitude high compression pistons if it"s the original block to the tractor looking at the casting numbers to try to find out what year the tractor the block is I was told 1948.
 
Tractor was assembled in September 1946 and the engine was installed in a tractor the same month.
Engine came with flat top cast iron pistons. Only way to know what's in it now is to look. Most have had the pistons changed several times by 2013.
 
The engine has been replaced. I.I.R.C...the serial number of the engine and tractor match each other on the Farmall H tractor.

To find out what pistons are inside, remove a spark plug and look in the cylinder.
 
Block casting number would be 6722DH. Head # 8060DB was used from the early forties to 1952 on M engines. Date code on block and head should end with a P for a September assembled tractor.
 
You must log in or register to reply here.

Similar threads

D
Ford 640 with high compression pistons
Replies
10
Views
631
RBnSC
RBnSC
S
4010 serial number . What does it tell me about the tractor
Replies
8
Views
558
sksmith
S
L
What can you tell me about the G900?
Replies
15
Views
4K
Ronnie Budd
R
T
Jubilee rotor play on distributor shaft
Replies
13
Views
3K
taterlove
T
C
VALUABLE MF Information
Replies
4
Views
2K
Jeff-oh
J
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top