Touch control repair kit

Dave from Texas · Oct 10, 2013

Does anyone sell a kit with all of the seals to rebuild a Super C touch control? I did not find it on this site.

Anonymous-0 · Oct 10, 2013

Case IH dealer has a kit for that. I believe it was a little over $100 when i checked into it last year.

mkirsch · Oct 10, 2013

I don't think there's a kit for the Super A/ Super C touch control. Only for the Cub.

The individual parts are all still available. A good CaseIH parts man should be able to set you up with everything you need.

ken house · Oct 10, 2013

bought one from case i h. not much in there. a few o rings and 2 gaskets.

Dave_Id · Oct 10, 2013

I bought a set a few years back from CaseIH for a Farmall C. Prepare for sticker shock.

Owen Aaland · Oct 10, 2013

Part number 354007R96.

Rick Remmert · Oct 10, 2013

I just did mine back in January-February of this year. If you go into the archives and put in Super C touch control it should pull it up. I posted a bunch of pictures. You will need a parts book as theres alot of parts. The IH number for the kit is 354007R96. I bought it at the local Case dealer for $119.47 all said and done. If you have questions, post them on here as there is plenty of help. I had a bunch of them about doing this.

Atilathehun99 · Oct 11, 2013

I took mine to a local hydraulics repair shop. I'm pretty sure it uses standard seals, gaskets, and O-rings. I think they even had/found a new boot. I don't recall the exact amount but don't it wasn't overly pricey.

couv · Oct 11, 2013

My brother makes the leather boots for the Touch Control rods. Email me if you would like a picture

Touch control repair kit

Dave from Texas

Member

Anonymous-0

Well-known Member

mkirsch

Well-known Member

ken house

Member

Dave_Id

Well-known Member

Owen Aaland

Well-known Member

Rick Remmert

Member

Atilathehun99

Member

couv

Member

Similar threads