Liftall Pump for AW-7 Tractor

Does anyone know if a Liftall Pump for a Farmall M can be fitted to an AW-7 tractor (petrol/kero or diesel version). The blanking plate is the same. Just wondering if it could be done as it would achieve two separate hydraulic systems on one old tractor.
Thanks in advance,
SadFarmall
 
I guess I'm not familiar with an AW-7, but if the pump will physically fit into the cavity, and the tractor has the transmission countershaft for driving the pump, then I don't see why it wouldn't work.
 
You should not be famiular with them as it is a down under tractor that is the Austrailian version of the M we have here. Acording to Henry they did have a factory built in 3 point hitch system and 30" rear wheels.
 
They surely did have the 30" rear wheels. The AW-7 Diesel had a direct injection 264 cubic inch motor. No start up on petrol and change over. They were a pig to start in cold weather. The tractor would have been considerably improved by running a 24 volt system instead of the 12 volt arrangement. If the batteries were just slightly flat on a cold day it simply would not start. The three point linkage arrangement is excellent and was also fitted to Super AM and Super AMD tractors. My 1939 Farmall M has it fitted too. Different gearbox lid and various valves fitted to make sure the three point linkage and hydraulic remote control do not interfere with each other.
SadFarmall
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top