6v starter for WD9?

nebken · Sep 22, 2013

Went to an IH auction yesterday and bought several h4 magnetos and this starter. I thought it was an M starter. Dad said it was too big. Looking up the numbers on the tag. it is a 6v Starter for a WD9.

Did Ih make 6v wd9's I thought 9's were 12v?

SDE · Sep 22, 2013

Looks allot like the one that fits my IH 400

Janicholson · Sep 22, 2013

A W9 and a WD9 (gas and Diesel) use the same block. So probably the same starter, one 6v the other 12. (opinion)

D Slater · Sep 22, 2013

Delco number on the metal tag read, 1108920 or 1108943 or 1113011? If so a gas 9 starter. Looks like a 9 starter missing the switch.

nebken · Sep 22, 2013

The numbers on the tag are 1108920 and 17043

I found the 1108920 number in my nnalert catalog. it says W9,WD9 WR9,and WDR9. It is listed under 6v starters.

There is also a WD9 starter listed under 12v with different numbers.

Did Ih use both 6 and 12v starters on the WD9 or this starter just for the W9 gas?

D Slater · Sep 22, 2013

6 volt came on gas and 12 on diesel, far as I know. That number is one of the 6 volts used.

Red Mercury · Sep 22, 2013

I just checked an IH parts manual and 1108920 is a starter was used on the W-9 and WR-9. As far as I know, all WD-9's are 12 volt. The aftermarket catalogues occasionally have errors in them--best to use IH's parts manuals for this stuff.

Also, WD-9's & W-9's don't use the same engine block. Similar, but not the same.

rustred · Sep 23, 2013

all wd9's and up are 12 volt.
the w9 is 6 volt.

6v starter for WD9?

nebken

Member

SDE

Well-known Member

Janicholson

Well-known Member

D Slater

Well-known Member

nebken

Member

D Slater

Well-known Member

Red Mercury

Member

rustred

Well-known Member

Similar threads