cub hydraulic pump

47fivewindow · Sep 17, 2013

the shaft on my cub hydro pump is too worn for the 0 ring to seal. I think Someone here recomemded a repair sleeve. Please tell me if and where these are available. thanks

TWheat · Sep 17, 2013

Someone else may have additional info, but most any auto parts house will have repair sleeves.
BUTT the problem is that the pump housing has to be bored out larger for the sleeve. It is a machine shop job.

gene bender · Sep 17, 2013

If yours has the o-ring you dont need any machine shop work

steve alderman · Sep 17, 2013

I am parting a cub out that has a good one on it if you want to buy it I will give you a fair price

john *.?-!.* cub owner · Sep 17, 2013

all the ones I have dealt with that used an o-ring did not have enough room for a repair sleeve.

47fivewindow · Sep 18, 2013

thanks all. I suppose I will buy a sleeve and try to adapt it. If not successful I will be in touch with steve

gene bender · Sep 19, 2013

I forgot its when there is seal you dont need to machine the hole.

cub hydraulic pump

47fivewindow

Well-known Member

TWheat

Member

gene bender

Well-known Member

steve alderman

Member

john .?-!. cub owner

Well-known Member

47fivewindow

Well-known Member

gene bender

Well-known Member

Similar threads

cub hydraulic pump

47fivewindow

Well-known Member

TWheat

Member

gene bender

Well-known Member

steve alderman

Member

john *.?-!.* cub owner

Well-known Member

47fivewindow

Well-known Member

gene bender

Well-known Member

Similar threads

john .?-!. cub owner