806 oil cooler

628 · Sep 12, 2013

The front end of the elbow tube pours oil. I have replaced o ring and the housing that it goes into. Also when i shut tractor off i can hear oil draining back into crankcase. Do i have a problem with one of the pressure valves?

the tractor vet · Sep 12, 2013

sometimes getting the tube to not leak can be a challenge , if the tube is not setting correctly as the mounting bracket may have gotten bent and allowing the tube to not align with the receiver this might be causing a bind on the O/Ring . Also never tighten up the piece mounting to the cooler till ya have everything snuged up starting with the tube first. Oh and make sure that you have the correct O/Ring.

628 · Sep 12, 2013

I'VE DONE ALL OF THAT. TOOK A COUPLE OF FLAT WASHERS BETWEEN BRACKET AND BLOCK TO GET EVERYTHING STRAIGHT.

806 oil cooler

628

New User

the tractor vet

Well-known Member

628

New User

Similar threads