H Hydraulic Pump Question

Sapper55 · Sep 7, 2013

I have a "41 H with the belly pump and a Saginaw 3 point hitch. It is really slow in lifting implements heavier than a 2 bottom plow. I understand that the output pressure may be around 650 psi. Is there an upgrade kit available to increase the working pressure to help lifting things like bushogs and other implements. Thanks for your information.
Sapper55

FBH44 · Sep 7, 2013

One thing I did lifting a buch-hog, is I ran the rear wheel ON the ground, with the rear end of the hog hiked up in the air to toss out cuttings. I did not attach teh top-link, and onlt lifted the front half of the hog.

Nebraska Cowman · Sep 7, 2013

bigger cylinders would increase lift but would be slower.

Janicholson · Sep 7, 2013

A belly pump from a early super H is compatible IIRC. it can have its relief set to 800 or 850 psi with no grief. Jim

Charlie M · Sep 7, 2013

What are you running for oil in the pump. I know lots of guys use hydraulic oil but when I had it in my H and did a lot of lifting plows it eventually got hot and wouldn't lift. When I use the recommended 30wt oil I've never had a problem.

Ellis Kinney · Sep 8, 2013

I agree with Charlie M. I have an M Farmall that does not lift well with hi-tran, but does very well with 30wt non detergent motor oil. Switch and try, It won't cost much. Ellis

H Hydraulic Pump Question

Sapper55

Member

FBH44

Well-known Member

Nebraska Cowman

Well-known Member

Janicholson

Well-known Member

Charlie M

Well-known Member

Ellis Kinney

Well-known Member

Similar threads