Super WD6-TA power steering

2 pipe

Member
I need a little help on my Super WD6-TA. When I move the 2-way valve either direction it pulls the steering wheel to the left. This is a factory power steering unit, 2-way valve, and priority valve. Does anyone know what might be causing this? I just got this tractor and it was already like this.
 
just out of curiosity what is the serial # of this tractor. as far as i knew the factory power steering came with the 400 models which replaced the super wd6-ta. the end of production is #13005 so you might have one that is factory or has been added off a 400 model. just been wondering about this as have never heard of the 6 series with factory power steering. appears like there is somthing sticky in the priority, just my thoughts. also if possible post a pic of the power steering unit.
 
Don't care what you say it's not "factory." It's add-on. It might be a well-done add-on. It might even use the parts off a W450. It's still add-on.

Sounds like the priority valve is hooked up wrong. The priority output of the valve should be connected to the steering, not the 2-way valve.
 
I wonder why if the SMTA had PS as a factory option, isn't it possible the SW-6TA did also? Just askin'.
 
I'll get some pics and post them later in the week or this weekend. Maybe someone can tell me then if it is hooked up wrong or if I need to do something to the priority valve, I've never taken one of them apart and don't want to mess it up as that usually costs me more money.
 
(quoted from post at 14:14:34 09/03/13) I wonder why if the SMTA had PS as a factory option, isn't it possible the SW-6TA did also? Just askin'.

AFAIK, it was not a factory option.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top