706 hyd ports

Cory Bennett · Sep 2, 2013

Hi,

I'm new here. I have a Farmall 706 i still use at the farm. She has a farmhand f11 loader on it. I was wanting to take the hyd pump off the pto and plumb a pressure and return port back off the tractor factory pump. Does anyone know where I can pull pressure and return from. She has 1 remote and thats all. Farmall pump get in the way with running the bush hog or post hole digger. Any info would help. Thanks

DeltaRed · Sep 2, 2013

You need a 'Power beyond" plate.It bolts to the remote valve body and gives full time flow.Someone here will tell you where to get one.

DeltaRed · Sep 2, 2013

Your tractor has a 12 gpm pump.The 'Farmhand' pto pump is probably around 20 gpm. The loader will be slower useing the tractor.You may need to replace the relief valve (under the right side of the seat),as the original 1450 psi wont have enough 'poop'.A 1486 reliefe is around 2500 and will fit.There is an optional/replacement pump that is 17 gpm,an even bigger one may be available.Running the loader from the tractor hydralic pump may somewhat shorten it useful life.Also add 5 gal extra oil (overfill)to the system to 'compensate'

706 hyd ports

Cory Bennett

New User

DeltaRed

Well-known Member

DeltaRed

Well-known Member

Similar threads