need a Farmall H coupling

PretendFarmer · Aug 31, 2013

On my 1950 Farmall H the coupling right before the transmission input on the shaft, is worn out. There is play in it. Where can I find one? I've looked.It's the coupling you would remove to replace the input shaft seal. Not the one that runs the lift all pump. Thanks.

Zachary Hoyt · Aug 31, 2013

I have the whole assembly, or whatever parts of it you would need.
Often the tapered bolts get worn. If you need the four tapered
bolts and the square plate I could sell you them for $25 plus $6 for
a flat rate package. I know it seems kind of high, but the tapered
bolts seem to go around that range when I have sold them on ebay.
If you need other parts let me know and I will get back to you right
away. Can't mail anything till Tuesday because of the federal
holiday. Email is open.
Zach

FBH44 · Sep 1, 2013

Well, talking about t his, not trying to hyjack the topic, but mine is so tight I have to use a home-made puller and extract it ooooff the shaft. I found another one at Spring River Salvage in Verona MO., and it is tight too. Have to extract it. a real PITA.

sflem849 · Sep 1, 2013

(quoted from post at 18:25:15 08/31/13) I have the whole assembly, or whatever parts of it you would need.
Often the tapered bolts get worn. If you need the four tapered
bolts and the square plate I could sell you them for $25 plus $6 for
a flat rate package. I know it seems kind of high, but the tapered
bolts seem to go around that range when I have sold them on ebay.
If you need other parts let me know and I will get back to you right
away. Can't mail anything till Tuesday because of the federal
holiday. Email is open.
Zach

Doesn't seem expensive when the new plate is NLA and the bolts would be over $125. That was the price when I checked 5 years ago. They might not even make them anymore.

PretendFarmer · Sep 3, 2013

(quoted from post at 02:25:15 09/01/13) I have the whole assembly, or whatever parts of it you would need.
Often the tapered bolts get worn. If you need the four tapered
bolts and the square plate I could sell you them for $25 plus $6 for
a flat rate package. I know it seems kind of high, but the tapered
bolts seem to go around that range when I have sold them on ebay.
If you need other parts let me know and I will get back to you right
away. Can't mail anything till Tuesday because of the federal
holiday. Email is open.
Zach

Email has been sent. I appreciate this.

need a Farmall H coupling

PretendFarmer

Well-known Member

Zachary Hoyt

Well-known Member

FBH44

Well-known Member

sflem849

Well-known Member

PretendFarmer

Well-known Member

Similar threads