Farmall 140 hydraulics

Spanky54 · Aug 13, 2013

Hydro work fine when nothing on them but when I put my cultivator on it won't lift it. checked the fluid, reckon I bled the air out, Any help?

erik dekeyser · Aug 13, 2013

Well if the fluid is up to where it should be than maybe you should check the filter its below where you check the oil just remove the 4 cap screws and pull out the filter. If that looks good than you might have to check the pump or you might have to rebuild the hydrolic box.

Spanky54 · Aug 13, 2013

Thanks. I'll give that a try right now.

Janicholson · Aug 13, 2013

The pressure relef valve could be stuck. If so it will move when unloaded and stop with a load. See manual or on line parts layout for location. Jim

Spanky54 · Aug 14, 2013

Been looking for about 30 min for a diagram or anything for a hydraulic relief valve or any kind of diagrams on a farmall 140. Found a couple of sites but the links don't work. Any help on a link? I'm new to this and its probably something easy.
Thanks
Spanky

Janicholson · Aug 14, 2013

This link should work. if not just go to caseih.com select USA select parts from the top list, then find parts. Jim
caseIH .com

Farmall 140 hydraulics

Spanky54

New User

erik dekeyser

Member

Spanky54

New User

Janicholson

Well-known Member

Spanky54

New User

Janicholson

Well-known Member

Similar threads