FARMALL M HAND CRANK

Anonymous-0 · Aug 6, 2013

ORIGINALLY WHERE WAS THE CRANK TO BE STORED ON THE TRACTOR WHEN NOT IN USE?

CNKS · Aug 6, 2013

Various places. Ours fit under the seat frame.

LenND · Aug 6, 2013

One of ours had a clip next to the seat that held the crank flat on the platform.

Wayne in MN · Aug 6, 2013

Store ours along the right side of the engine between the block and frame.

D beatty · Aug 6, 2013

Had a frame mounted tool box and put it in there. Sold the M and put the tool box and crank on the 450.

Tom Fleming · Aug 6, 2013

Or, you could pin it to the rod that you put it on to crank it. That is what the little hole is for.............a cotter pin.

Anonymous-0 · Aug 7, 2013

Our's hung on a nail in the driveway of the corn crib from a short length of baler twine tied around it. You ever tried to hand crank an M with 4" M&W pistons?

It always started good once converted to 12V, on 6V it first failed to start when it was just two days old.

Anonymous-0 · Aug 7, 2013

I hand crank an F-20 with the timing retarded. Would I attempt to hand crank an M? No way. I would store the crank in the barn.

FARMALL M HAND CRANK

Anonymous-0

Well-known Member

CNKS

Well-known Member

LenND

Well-known Member

Wayne in MN

Well-known Member

D beatty

Well-known Member

Tom Fleming

Well-known Member

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

Similar threads