(800) 853-2651
SHOP NOW

140 governor

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

F

farmall4856

Member
I have been noticing my 140 has seem to be losing a little power seems I have replaced the governor spring in it I havent adjusted the links wondering of that's what is wrong I takes a minute to catch up with the throttle and it gets the rpms get way faster than what they should be but when you slow it down all the way it sounds like its at about half throttle. What's wrong with it just needs to be adjusted some.? Its a 1961 farmall140
 
You dont adjust the gov but you do adjust the linkage going to the carb. With engine off remove the pin in the clevis now open throttle and adjust the clevis so th pin goes in hold the carb open. If the input shaft wobbles a bushing can be installed so that shaft just moves back and forth. Are the springs loose on the throttle rod that connects to that shaft sometimes they are coated with paint and or rust. Is the spring in the gov good.
 
You must log in or register to reply here.

Similar threads

G
Super A governor adjustment
Replies
5
Views
313
560Dennis
560Dennis
S
Ford 3600 gas Governor problem?
Replies
11
Views
416
65Ford2000
6
W
424 Governor issue
Replies
3
Views
327
caterpillar guy
C
K
no throttle lever response at governor
Replies
7
Views
354
steve(ill)
S
A
1974 IH 140 manual part number
Replies
5
Views
195
BarnyardEngineering
BarnyardEngineering
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top