400 diesel tach drive port

Hi all,
Anyone know where a guy could pick up the tach cable drive port for a 400 diesel? It would be for underneath the distributor drive port.
Thanks
Chuck
 
My 400 is a gas, but I think I bought mine at the IH/Case dealer. If it wasn't there then, I got it at the salvage yard in Downing WI. 877-530-1010. It was a new part.
SDE
 
Would they be different between gas and diesel models as the rotation of distributor is different?

I know there is currently a tach cable drive housing on eBay said to be off an MD I believe. Looked the same to me as one for a 400 but I would want to do a little research on part numbers before assuming.
 
Chuck, I looked up distributor housing with the tack drive in my 400-450 parts book. Both gas and diesel use the 363-763-R11 housing that has the tack drive. So any tack drive housing from any 400 or 450 should work on your diesel. But the actual tachometers for the gas & diesel are different as the diesel turns opposite. Hope this helps. Al
 
Try Bates Corporation Bourbon,In.. I put a new one on my a 450 gas . You might have to buy housing and new gear. The new gear won't fit the old housing.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top