Will an Aftermarket WF from an M fit a H?

NickatKY · Jul 18, 2013

I have what I believe is a Speeco wide front on an M, will it fit an H?
Thanks Nick

Vito · Jul 18, 2013

M is wider than a H.Measuring would be the best thing.

HTH

Vito

rustyfarmall · Jul 18, 2013

No, the M is wider than the H.

DeltaRed · Jul 18, 2013

As was said,NO.But with a drill,torch and possibly a welder,you could make it fit...

Nebraska Cowman · Jul 19, 2013

I'm going to disagree with the others. I say it likely has slotted holes and will fit either. But if it does not you can re-drill holes.

Owen Aaland · Jul 19, 2013

The H is 2 inches narrower than the M. The H is 18" wide and the M is 20" wide.

Aftermarket wide fronts were generally made to fit many many different makes and models. The main assembly was the same no matter what tractor it was going to be used on but they would furnish different mounting packages to fit the particular model for which it was purchased.

rustyfarmall · Jul 19, 2013

The M uses a different mounting bolster than the H. Different part numbers.

Will an Aftermarket WF from an M fit a H?

NickatKY

Well-known Member

Vito

Well-known Member

rustyfarmall

Well-known Member

DeltaRed

Well-known Member

Nebraska Cowman

Well-known Member

Owen Aaland

Well-known Member

rustyfarmall

Well-known Member

Similar threads