189 two-way plow

Dave63

New User
This message is a reply to an archived post by Rootsy on May 04, 2012 at 06:00:18.
The original subject was "Re: 189 twoway plow".

Rootsy, I saw on an old post (5/4/12) that you had a dimensional copy of a genuine IH draft link for use with a Farmall Super A two-way plow. Do you make these yourself? If so I would be interested in purchasing one. If not, any dimensional information or patterns would be greatly appreciated so that I could fabricate my own. Thanks.
 
I had posted some pictures a while back of an original one for reference on dimensions.

... see if I can dig them up again...

If you're going to make your own, these should help get you close enough.
a119778.jpg

a119779.jpg

a119780.jpg

a119781.jpg

a119782.jpg

a119783.jpg

a119784.jpg

a119785.jpg
 
You're welcome.

Should be a fairly easy project if you do decide to build. None of the dimensions are too critical on it.

I'd be happy to take more pictures if there's something that's not clear, just let me know.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top