(800) 853-2651
SHOP NOW

560 hyd fluid filter

L

lee little

Member
Went to parts store today to buy some wix filters.One I wanted was the oval filter for my 560s hyd fluid.I have bought several over the years but he said they list 2 oval filters.The only difference he could find is one is 25 microns and the other is 35 microns.I have never encountered this before.Can any of you shed any light on this?Thanks in advance Lee
 
Wix 51139 are replacement filters for the "double donut" filters in the original screen assembly. They come 2 to a pkg. with gaskets. Nominal micron rating listed is 35.

Wix 51469 is a replacement for the common oval 1pc. filter that was factory equipment later on and that replaced the screen/double donuts when desired. Cover gasket is included. Nom. micron rtg. listed is 25.

Wix 51470 is a taller/thicker version of Wix 51469. Cover gasket should be included. I have no experience with these. I think it requires the use of a different filter cover than the original or perhaps a spacer. Nom. micron rtg. listed is 35.

AG
 
Thanks for clearing that up for me.I have bought several of these over the years and had never been asked which micron I wanted.Parts man thought they were the same otherwise.Now I can order one and change my hyd oil.
 
The original style was two doughnut style filters inside a wire mesh retainer. That assembly was replaced by the larger oval filter along with a bypass valve with screen. Unless you still have the original retainer you will not be able to go back to the original style filters.
 
Micron is the size of the crud that the filter will filter.

25 microns is smaller than 35 microns, so the 25 micron filter will filter smaller bits of crud out of the oil, but it will also plug quicker.
 
You must log in or register to reply here.

Similar threads

J
Low oil pressure on a JD950
Replies
2
Views
2K
bmaverick
bmaverick
D
7600 hydraulic filter
Replies
4
Views
740
Dopp Creek
D
M
TO20/TO30 general questions
Replies
11
Views
4K
Mad Farmer
M
J
Harbor Freight
Replies
13
Views
768
504
5
T
Hydraulic help on our Farmall 560
Replies
10
Views
1K
BarnyardEngineering
BarnyardEngineering
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top