Super a plow

Woodby · Jun 15, 2013

I have a 52 SA and plow. I can't get the tip angled down enough to dig in. I'm laying under it studying every possible configuration and I can't see how to get any steeper of an angle on it. Help!

gene bender · Jun 15, 2013

Dont you have the linkage going from the rockshaft down to the hitch on the plow to make the point tilt for depth.

DeltaRed · Jun 15, 2013

Look at the share.If it is worn,it will not suck in.No matter how much you stand it on its nose.A share must have 'suck'.If it looks like a sled runner,it will not go into the ground.Worn share could be your problem,not the linkage.

Woodby · Jun 15, 2013

No linkage just plow. Plow is in really good shape all the way around. I took two bolts out of the drawbar so and ran a chain from it to the mid section hydraulics so it would tilt and that has me plowing.

georgeky · Jun 15, 2013

get the depth control linkage for it and it will work properly

Woodby · Jun 16, 2013

Anybody have dimensions for the linkage so I can fabricate it?

Cue P. · Jun 17, 2013

If you search on this topic in the Farmall forum you will find some pics of the linkage and setup:
"A189 Plows on Super A"

Woodby · Jun 17, 2013

Thanks

Rootsy · Jun 19, 2013

(quoted from post at 22:09:58 06/17/13) Thanks

You need this part...

Super a plow

Woodby

Member

gene bender

Well-known Member

DeltaRed

Well-known Member

Woodby

Member

georgeky

Well-known Member

Woodby

Member

Cue P.

Member

Woodby

Member

Rootsy

Member

Similar threads