(800) 853-2651
SHOP NOW

IH-1000 loader issues

C

chad from michigan

Member
We just installed a Ih-1000 loader on my dads Super A. It works ok but the pump is getting hot hot you can"t touch it and you can smell it and it got hot enough to burn the grease and grim off.
the loader is hooked up the same as the one on my Farmall 100 but this one used to be on a farmall Cub. Could the bypass block have the wrong gasket on it do I need gaskets specific for the Farmall Super A? I am guessing dad may have used one of the farmall cub gaskets. Could this cause it to get hot?
Thanks
Chad
 
Chad not only do you need the correct gasket but you need the correct by-pass block. DO NOT Run it any more! I took the teeth right off the cam gear one time because of hydraulic blockage.
oldiron29
 
The IH bypass block that came with the loader is designed to work with both tractors, using different bolt holes and different ports.

You must have it somewhat right because the loader wouldn't work at all, and you'd have bigger problems.

At this point you better take it apart, see what's wrong, and fix it. What it "could be" is irrelevant, it will have to come apart to be fixed anyway, and you'll know when you get it apart.
 
You must log in or register to reply here.

Similar threads

S
2001 IH Loader Question
Replies
6
Views
577
Stonewall68
S
V
IH C Loader
Replies
3
Views
472
504
5
J
Case IH 895 steering issue
Replies
3
Views
212
MARK ROBKE
M
F
IH 484 Loader Tractor
2 3
Replies
47
Views
2K
MARK ROBKE
M
T
Farmall 504 hydraulic issues with loader
Replies
4
Views
276
Timryan0735
T
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top