200 cylinder rocker arm

clint s · Jun 7, 2013

Anyone have one of these for sale. #7 on the parts breakdown.
Mine might be repaired or may be easier replaced depending on cost

http://partstore.caseih.com/us/parts-search.html#epc::mr59118ar921220bi-21

Thanks
Clint

steve alderman · Jun 7, 2013

what do you need dont have a manual handy I have the rocker assembly and all the push rods out of a super c that I dont need

Wayne in MN · Jun 7, 2013

This is for a Fast-Hitch. not engine parts.

clint s · Jun 8, 2013

Correct, goes through the seat. Mine broke on the weld that connects flat stock to the round bar through the seat. I do not know when but the round part that goes through the seat was replaced with a bolt. Welded it a few times with my mig and it last for awhile , but it does not hold. I could take it off and take it to shop and have it Arc welded, but possibly looking for a used one.

steve alderman · Jun 8, 2013

I do have some fast hitch parts too and I think I have what you need if you could post a picture that would be a big help

clint s · Jun 9, 2013

Here is a pic

clint s · Jun 9, 2013

Oops forgot the pic

clint s · Jun 9, 2013

Mine also is collared on both sides, not just the one. Let me know what you have and maybe I can make it work.

steve alderman · Jun 9, 2013

I have it let me know if you want a picture looks to complete and in good shape

clint s · Jun 9, 2013

Throw up a pic and what you want for it. I am in 13131 for shipping. I just re welded mine so I will see if it holds.

steve alderman · Jun 10, 2013

heres a picture of the part I was thinking 35 for it and 15 for shipping if you wanted it

clint s · Jun 10, 2013

Steve did it come off a 200 or a super C??? Those #'s cross as the same. It looks the same to me. What do you want payment wise. I think I have pay pal, but have not used it in a while. May have to update CC# , but no biggie. Could do a check or a M/O too. Any other parts, I have a feeling I may need a few more when I start digging into the fast hitch area.

Clint

PS May be Wednesday or Thursday before I post back.

steve alderman · Jun 10, 2013

its from a super c I have alot of the mounting brackets for it left like the one that go on the tool box and the ones that go on the rear of tractor you can pay by pay pal or personal check dont matter to me

clint s · Jun 11, 2013

(quoted from post at 18:27:14 06/10/13) its from a super c I have alot of the mounting brackets for it left like the one that go on the tool box and the ones that go on the rear of tractor you can pay by pay pal or personal check dont matter to me

I made it home earlier tonight than expected.
Steve, here is my E mail [email protected] we can up set up the particulars though E mail since PM's do not work. If I need the seat bracket(s) how much for them. I may have a bad bushing in one of mine, wont know until I get it apart. There is a bolt in mine and I cant tell it there are threads in there chewing it up or not. Could you check the rod in the bracket to see if the bushing is good???

Thanks

Clint

clint s · Jun 30, 2013

Big thanks to Steve A. Part is on the 200 and working good.

200 cylinder rocker arm

clint s

Member

steve alderman

Member

Wayne in MN

Well-known Member

clint s

Member

steve alderman

Member

clint s

Member

clint s

Member

clint s

Member

steve alderman

Member

clint s

Member

steve alderman

Member

clint s

Member

steve alderman

Member

clint s

Member

clint s

Member

Similar threads