International 225 Hay Swather

case90xt

New User
I"ve been looking for the clutch plates for the left and right drive. The clutch assemblies are located under the cab, where the linkage comes down from the steer levers. The clutch assemblies look like a clutch in a tractor only smaller and there is one for the left and one for the right. My local CaseIH dealer cant get them, and says they are no longer made. Wasn"t sure if there was still anything out there or not.
 
Someone look up AE24102 for a JD 830 windrower. It may be the same or close.

Where I am I cannot look up the spec and do not know what he needs exactly in inches.
 
Not saying the IH was made by Hesston, but I know driving thru the town of Hesston, they seem to build several different brands at what is now AGCO. I drove a Cockshutt self propelled many years ago and it was made by Hesston waaaaaay back then, so they have been doing it for years.
 
Clutch rebuilding shops can put new faces on the old disks. Might even be reasonably less expensive. Jim
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top