Clamshell fenders

Anonymous-0 · Jun 4, 2013

I have a question for you guys. I have a set of clamshell fenders for either an H or B. Nobody can remember which tractor they were taken off years ago. No clamps that I could find. They were setting in the shed for many years so look real straight and not all rusted out. Is there a difference between the H and B fenders. I've got a person interested in them. I was wondering what they sell for up here in Minnesota. thanks for any help Denny

gene bender · Jun 4, 2013

The B fenders have a half round opening in the bottom with holes there and the H is a clamshell type that clamps to the axle housing and bolt fast with u-shaped clamps

randy hall · Jun 4, 2013

if they are for an h they will have holes in the bottom pad for half inch bolts, no u bolts.

Anonymous-0 · Jun 4, 2013

only the C-super C bolt on with a u bolt clamp. the H has a mounting plate that bolts to the fender and then to the axle housing with spacers between plate and housing. I bought a pair of original H fenders this past winter--central Minn.-- for $230.00. good condition, poor paint. H fenders are 25 inches high. B fenders would be less money.

sflem849 · Jun 4, 2013

(quoted from post at 16:03:30 06/04/13) only the C-super C bolt on with a u bolt clamp. the H has a mounting plate that bolts to the fender and then to the axle housing with spacers between plate and housing. I bought a pair of original H fenders this past winter--central Minn.-- for $230.00. good condition, poor paint. H fenders are 25 inches high. B fenders would be less money.

Good answer Gary.

Clamshell fenders

Anonymous-0

Well-known Member

gene bender

Well-known Member

randy hall

Member

Anonymous-0

Well-known Member

sflem849

Well-known Member

Similar threads