adapters to convert 2pt to 3pt

Va Gasman · May 29, 2013

Where can one find the adapters to go in a 2 pt hitch to convert it to 3pt?

504-1 · May 29, 2013

look here

504-1 · May 29, 2013

look here
http://www.tonystractors.com/

Anonymous-0 · May 29, 2013

Watch ebay. The good one piece one's turn up every now and then.

Zachary Hoyt · May 30, 2013

I got a set of arms with a bend in them off ebay that I was later told were for a plow, but I use them as a 3 point adapter and the bend raises the 3 point hitch implement to a more normal height than the usual straight arms. The set went for under $100, which was less than anything else I could find. I do not know how common they are, though.
Zach

the tractor vet · May 30, 2013

I use to build a set that were adjustable for CAT 1 and 2 three point and were tough enough to handle a five bottom semi mount plow . but it has been 12 years since i made the last set. . I had a jig made up to build them in and i had a steel supply house that would order in the stock for the prongs as it is not a common stock bar . The one local weld shop had a CNC burning set up and the program to cut the notch and they would burn out a dozen at a time from my bar stock. the rest was 1/2 inch x 4 bar stock and scd 80 pipe with weld on Cat 1 and 2 ball sockets. I would then sell a couple sets a different consignment auctions . back then they would bring 225 to 275 a set. I am still usen one set for my 806.

CNKS · May 30, 2013

This site is about as cheap as anyone.

John G. Hasler · May 31, 2013

Note that these adapters allow you to hitch three-point implements but don"t give you a hitch that works like a three-point.

adapters to convert 2pt to 3pt

Va Gasman

Member

504-1

Member

504-1

Member

Anonymous-0

Well-known Member

Zachary Hoyt

Well-known Member

the tractor vet

Well-known Member

CNKS

Well-known Member

John G. Hasler

Member

Similar threads