(800) 853-2651
SHOP NOW

350U Fan Shroud

F

Formerly PaMike

Member
How does the fan shroud on a 350U attach to the radiator? Mine came loose today and is rattling and getting caught by the fan. I cant see any bolt holes to bolt it in. I looked at the parts book and I cant see any fastners there either.
 
4 long bolts go through the radiator cover into 4 holes in the shroud. You have to remove the grille to get to them, but the holes are visible in the shroud where it attaches to the rear of the radiator.
 
Ok, so pull the front grill. The 4 bolts are in the upper and lower corners of the rad? The bolts runs from front to back of the tractor? They don't bolt to the side of the rad?
Also, how do you loosen tension on the fan belt? I had to cut the fan belt, so the fan wouldn't tear the shroud up. It looks like there is some sort of adjustment on the waterpump pulley??
 
Bolts are in the four corners of the radiator front to back. Fan pulley is in two parts, one rotates and tightens or loosens the belt. Should have a set screw in it. May be rusted in place. Loosen the screw and tap the front half gently counter clockwise to loosen, clockwise to tighten as viewed from the front. It will break fairly easy. Generator is similar.
 
You must log in or register to reply here.

Similar threads

S
Help removing R radiator?
Replies
4
Views
403
ShawnR
S
T
M Radiator Removal
Replies
5
Views
350
BarnyardEngineering
BarnyardEngineering
T
Advice on changing radiator and fan shroud on 8N?
Replies
11
Views
697
tractordust
T
D
farmall 300 split,..
Replies
6
Views
291
dewy
D
S
  • Question
oil Drip pan question 1966 IH Cub Lo Boy Tractor
Replies
18
Views
632
scott 1234
S
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top