Super C Slow Moving Sign

Larrry Hardesty · May 24, 2013

I have a couple of Farmall Super Cs I want to put slow moving signs on. Any one got some bright ideas where I can install them with a minimum (maybe none) of drilling, the signs be out of the way, but still visible.

Thanks in advance

Larry

Janicholson · May 24, 2013

If it has clam shell fenders, make a bracket that attaches to the rib on the outside of the left fender and extends up and outward to the left. Put the sign on this bracket over the left tire. A C channel of one inch X one inch would work I think. Drill and tap into the rib to limit distortion, and keep it pretty. Jim

Wayne in MN · May 24, 2013

Attach it to the PTO shield; fashion an "L" shaped bracket from some 1" wide iron and drill holes to match the sign. Drill one more hole and fasten to the slot at the rear of the shield. 10-15 minutes??

gab · May 24, 2013

When I used to drive my Super C on the road I used a L shaped strap about an inch and a quarter by a quarter bolted to one of the seat pan bolts

rpirkle1 · May 24, 2013

I took the mounting post that came with the kit from Tractor supply and bent it to L shaped. Mount it to the PTO chield with the bolts it came with.

steve alderman · May 24, 2013

how about some magnets or double sided tape

LMack · May 25, 2013

We usually attached it to the back of the seat. We would take it off once we were in the field since we would plan to be there for a while. Used bailing wire worked just fine.

Larry Hardesty · May 25, 2013

Thanks to everyone for the ideas. Seat pan attachment might be a winnner.

Larry Hardesty · May 25, 2013

Might be another winner. Thanks

Super C Slow Moving Sign

Larrry Hardesty

New User

Janicholson

Well-known Member

Wayne in MN

Well-known Member

gab

Well-known Member

rpirkle1

Member

steve alderman

Member

LMack

Member

Larry Hardesty

Member

Larry Hardesty

Member

Similar threads