This message is a reply to an archived post by Teakettle on July 03, 2012 at 16:25:46.
The original subject was "3pt stabilizers on 454 and similar tractors".
I stumbled on this post and am also concerned about the 3PT geometry on my 454. I mostly use a finish mower and have the factory underaxle mounts. I bought chains a couple of years ago to keep the mower straight when on an incline. When I raised the mower, I snapped one of the axle mounting bolts. I now use a single adjustable threaded bar on one side but have to keep some unwanted swaying. I noticed that the mower will swing to one side and back to center when raising the 3PH. The lower arms appear to be factory and have IH stamps.
The original subject was "3pt stabilizers on 454 and similar tractors".
I stumbled on this post and am also concerned about the 3PT geometry on my 454. I mostly use a finish mower and have the factory underaxle mounts. I bought chains a couple of years ago to keep the mower straight when on an incline. When I raised the mower, I snapped one of the axle mounting bolts. I now use a single adjustable threaded bar on one side but have to keep some unwanted swaying. I noticed that the mower will swing to one side and back to center when raising the 3PH. The lower arms appear to be factory and have IH stamps.