B414 oil on brakes

jnking · May 11, 2013

Hello I"m working on a B414 that has oil on the brakes and I need to replace the seals on the diff output shafts to the brakes. Can someone help me with removing the top diff cover there are two bolts I cannot get to under the hydraulics for the three piont. I was told by the dealer that i had to take ther cover off and remove a bull gear to be able to reemove the inner brake plate that is bolted to the housing. I have removed the outer bolts but they won"t come out. Any help with this problem would be great!

Bernard le mecano · May 12, 2013

Hi, you have to remove the hydrolic cover to access to the bolts that secure the bull-gear to the axle.Remove the bolts then the axles to pull the bull-gears out, the you can remove the brake plate and change the seal. Hope this help. Bernard from Quebec Canada

jnking · May 12, 2013

Can I do all that without removing the rear axles?

Bernard le mecano · May 12, 2013

Hi, i"m not sure you can slide the gear off the axle to remove it. You will see it when you lift the top cover. Bernard in Quebec Canada

jnking · May 12, 2013

There is one bolt on the hydraulics that I cannot get to and I cannot remove the transmission cover because the hydraulic s cover a bolt for that. How did they put this thing together?

Bernard le mecano · May 12, 2013

Hi, you don"t have to remove the transmission cover to access to the bull-gear, only the hydrolic one.Bernard in Quebec Canada

B414 oil on brakes

jnking

New User

Bernard le mecano

Member

jnking

New User

Bernard le mecano

Member

jnking

New User

Bernard le mecano

Member

Similar threads