B414 hydraulics

Phil Tibbetts · May 5, 2013

The front of my 3PH unit is unlike the one in the parts book. Mine only has a fast slow knob on the left and nothing on the right. Also the internals are not the same. I am including 2 pics of the front. Anyone have an idea about this?

Cyrush · May 6, 2013

Your right there !!

It looks like a normal vary touch valve with the isolator balve blanked off ??

Never seen one like that ??

Just a thought could it be the isolator valve spindle has been broken off ?? And the spool is still under the cap undr the 2 screws??

Do you need a service manual??

Phil Tibbetts · May 6, 2013

The cap looks original, just a screw in the center holding it on with a gasket underneath. I have manuals but they don't match up.

JimB2 · May 6, 2013

Hi Phil,
Never seen one like that either.
Since tractor is painted yellow, I am curious if it wasn"t a change for some industrial or highway department attachment like a side mount mower etc.

JimB

Bob · May 6, 2013

Is the nameplate there and actually says it"s a B414?

Does it have an auxiliary hydraulic valve with rear outlets? if NOT, there"s no need for the isolator valve and/or it"s an industrial like the other fellow said.

rosedale123 · May 6, 2013

That looks exactly like is on my father in laws B414. It is also missing the handle ( it broke off) on the valve on the right, but the "spool Piece is inside". He had a loader on his at one time and it was plumbed into the middle port ( where you have a capped pipe fitting)

Phil Tibbetts · May 6, 2013

There are no remotes on it and it was painted yellow right from the factory as there is no sign of red paint. We figure it was ordered for some municipal or industrial use. Also it does have the B414 tag with serial #.

B414 hydraulics

Phil Tibbetts

Well-known Member

Cyrush

Member

Phil Tibbetts

Well-known Member

JimB2

Well-known Member

Bob

Well-known Member

rosedale123

Member

Phil Tibbetts

Well-known Member

Similar threads