560 Rims

Bud Kaiser · Apr 24, 2013

I would like to put some 38X16 rims on my 560 where could I find these.Would a rim off of a newer farmall, IH or even a John Deere work? I want to put a 16.9 wide tire on it and want the tread flat.

CNKS · Apr 24, 2013

Someone can correct me, but I think the old designation for 16.9's was 14, meaning you only need 14 inch rim, as 14 is the tread width, 16.9 is the cross section at the widest point. The old 14-38 and the newer 16.9-38 are the same tire.

John 37A · Apr 24, 2013

Yeah, but a lot of pullers like a wide rim to square the sidewalls a little. I run 16" rims with 15.5-38.

I think any double bevel rims will work, but someone can correct me if I'm wrong.

CNKS · Apr 24, 2013

I know nothing about pulling, I meant agriculture use.

504-1 · Apr 24, 2013

Yes, JD wheels will fit a 560

randy hall · Apr 24, 2013

there never was a 14-38 tire. the old sizes only went to 13 in a 38 inch tire. there were 14-34.

Dblair · Apr 25, 2013

here's the chart from Miller Tire for the old sizes

mkirsch · Apr 26, 2013

The rims are industry-standard double bevel rims available at any tire shop that does ag tires, and farm equipment dealers. Any 38" rim with the two V tracks (bevels) will fit.

Anonymous-0 · Apr 26, 2013

All rims are not the same. Some have 6 lugs some have 8 lugs some have 12 lugs.

560 Rims

Bud Kaiser

Member

CNKS

Well-known Member

John 37A

Member

CNKS

Well-known Member

504-1

Member

randy hall

Member

Dblair

Well-known Member

mkirsch

Well-known Member

Anonymous-0

Well-known Member

Similar threads