Scraping the bottom of the frog barrell

Stumpy(NH) · Apr 21, 2013

So I'm putting together an A-192 handlift plow for my Daughter's A. I have got most of the parts together, but am running into a problem with the moldboard, and plow share. It appears that I have two differant ones. So here's my question....Does anyone know if I can bolt moldboard, landside, frog and all from any other IH plow onto this A-192 beam? Long story short, I'm looking for a shortcut so I can get her out there turning ground at plow day on her own tractor.

Thanks for your help

Stumpy

Janicholson · Apr 21, 2013

IIRC the good news is the shanks and bolt patterns are the same on most if not all IH plows. Jim

T in NE · Apr 21, 2013

Don't know about one that old, but I have a friend that deals used equipment, that claims you can bolt just about any bottom you want onto any plow, and that he sold a lot of Oliver/White bottoms to guys with IHC and JD plows.

mkirsch · Apr 22, 2013

Yes, any IH frog will bolt on to the beam.

Ideally, if you could find a newer Super Chief bottom, you can get relatively inexpensive replacement parts for it right from the dealer, online or at many TSC stores. The older ones leave you scrounging for parts as they wear out.

Stumpy(NH) · Apr 22, 2013

Very nice!!! Thanks guys...I'll keep an eye peeled for the newer style. For now I'll steel an entire assy off of my H mounted plows for her.

Stumpy

Scraping the bottom of the frog barrell

Stumpy(NH)

Member

Janicholson

Well-known Member

T in NE

Well-known Member

mkirsch

Well-known Member

Stumpy(NH)

Member

Similar threads