Jim in Ok

Member
I saw these wheels on a F20. I have never seen any like this. They look like they are set up for duals. Can anyone share some info on these rear wheels
a109662.jpg
 
Never saw that type before,either.Very unusual.I see they are French/Hect wheels.They would make a fine specimine at a show.Or anywhere else for that matter....
 
those are F&H wheels for making duals.

the outside 'rim' is the same rim that you normally see with the IH cast center wheel

theyre not 'rare' but you dont see them alot. seen a couple dozen sets over the years
 
And I may be way off base but I don't think they use the same rim as a cast center wheel, the cast center is a larger diameter and the mounting lugs on the rim are shorter. I tried to mix and match cast center rims on some variable tread centers like the ones pictured and it was a no go situation.
 
it could be the roundspoke center off the 40 inch duals im thinkging fo fitting the cast center rims. ill have to wander out and take my tape measure with me
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top