560 /301

pullinforfun · Mar 27, 2013

hi i have a farmall 560 with th gas 301 CI, and it still has the 806 IH exhaust on it and the person bent the hole for exhaust to come out bigger, the "offset" piece they sell on ebay, will it set it back to the original hole? thanks

mitchel - farmall 460 · Mar 28, 2013

I am working on the same problem with my 460. I called the supplier on eBay and asked him and he said it would get it closer but not exact I would stil have to cut hood. I am going to make my on offset with some help from local muffler shop.

Anonymous-0 · Mar 28, 2013

I installed a new manifold last fall and had to get the offset off of Ebay. It was on my 460 gas, same manifold as 560, and still had to cut out existing hole in hood about and inch or so.

ejr-IA. · Mar 28, 2013

No need in makeing a new hole with the right off set from a muffler shop.Had them make a exspaned bell to fit the 806 shortend pipe with two bends and up through original hole.

560 /301

pullinforfun

Member

mitchel - farmall 460

Member

Anonymous-0

Well-known Member

ejr-IA.

Member

Similar threads