super c radiator T bolts

Sparky70

Member
Does anyone have a reasonable source for the two bottom radiator bolts? I think they are T bolts but not sure. Thanks
 
Plain old carriage bolts.

Been several years but I think I bought 3/8" x 2" galvanized and had to cut them a littler shorter to make it work
 
Per the Super C and Farmall 240 parts catalog both tractors use the same bolt p/n 352632R1. It is a Grade 5 carriage bolt 7/16"-20 NF thread with a fiber or plastic insert lock nut and I think the length is 1 3/4". I ordered mine from Fastenal for my 240 for little of nothing. If you don't have the original bolts and need the correct length let me know and I'll check tomorrow as I have them ready to install in my 240 and I'll will be happy to measure for you. You also need a couple of rubber pads between the radiator and the lower bolster where the bolts install, Hal.
 
I measured the bolts and sure enough they are 1 3/4" long along with being 7/16" - 20 NF thread I as noted earlier. I also will be putting a thin flat washer between the nut and lower bolster for a better surface for the locknut to snug up against. You will probably find it is a two person job to reinstall the radiator as several things have to come together at the same time, Hal.
 
Thank you Hal. Appreciate the info and especially the prompt reply. Ill take it from here, again much obliged.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top