Author	[Modern View]
don ober 03-10-2013 16:33:42 66.87.7.231 Report to Moderator	still have a lot of stuff left on my 340 that I rolled I ll give it another week or two then scrap it when the weahteer breaks,just hate to junk that many good parts.But not going to have it sitting here reminding me everyday. [Reply]   [No Email]
BartO 03-11-2013 08:16:18 74.43.124.171 Report to Moderator	Re: wreck IH340 in reply to don ober, 03-10-2013 16:33:42   How is the linkage from the valve bank to 3 point cylinder? I think mine could use replacement. My seat is also not that great. Let me know if either of these are in usable condition. Thanks, Bart [Reply]  [No Email]
Don Ober 03-11-2013 10:04:24 63.27.44.41 Report to Moderator	Re: wreck IH340 in reply to BartO, 03-11-2013 08:16:18   Bart are you talking about the hyd lines that go back under seat our the linkage that goes to the valve bank?I think both are good. Don [Reply]  [No Email]
BartO 03-11-2013 14:51:11 74.43.124.171 Report to Moderator	Re: wreck IH340 in reply to Don Ober, 03-11-2013 10:04:24   I believe it is a line that goes from the valve block in front of the shifter under the seat to somewhere in the back. Currently I have to push the linkage on top of the valve block while the 3 point lever (on the right by the fender) is all the way up in order to raise the 3 point the entire way. My thought is that this line needs adjustment or replacement. I was waiting for a warmer day to tinker with it though. [Reply]  [No Email]
don ober 03-13-2013 08:31:36 66.87.4.233 Report to Moderator	Re: wreck IH340 in reply to BartO, 03-11-2013 14:51:11   might just be that the hydratouch is stiff mine done that in cold weathewr till it warmed up,was told I just didn t use it enough to keep moister from get in it.the valve bank and linkage on mine are fine the 2 remote handles did break off. Let me know if you want anything. don [Reply]  [No Email]
Mark W. 03-11-2013 06:37:13 64.83.132.2 Report to Moderator	Re: wreck IH340 in reply to don ober, 03-10-2013 16:33:42   I sure could use a decent oil pan and parking break lever. [Reply]  [No Email]
Don Ober 03-11-2013 09:56:06 63.27.44.41 Report to Moderator	Re: wreck IH340 in reply to Mark W., 03-11-2013 06:37:13   Break lever good,either E-mail or leave Number to call thanks Don [Reply]  [No Email]
Mark W. 03-11-2013 11:35:16 64.83.132.2 Report to Moderator	Re: wreck IH340 in reply to Don Ober, 03-11-2013 09:56:06   Email sent. Thank you. Also looking for a decent pto shield. [Reply]  [No Email]
boothill 03-10-2013 17:56:41 76.0.80.192 Report to Moderator	Re: wreck IH340 in reply to don ober, 03-10-2013 16:33:42   HI,i'm looking for 6 lug front hubs from 340 r/c , hub #370289. my number 254-595-0359 thanks Larry. [Reply]  [No Email]