(800) 853-2651
SHOP NOW

140 fast hitch plow

A

Anonymous-0

Well-known Member
I am buying a fast hitch plow for my 140. The part number on the beam is 520849R11 which seems to match the plow for a 140, but there is a serial number tag riveted to the side of the beam which has on it the serial number and also says "cub 194 Plow." From what I can find, the serial number for the beam for a cub plow is 520260R21CUB. Can anyone confirm for me that this is a 140 plow? Thanks
 
To clarify, the part number 520260R21CUB is not on the beam but the part number 520849R11 is on the beam. What is throwing me off is the riveted tag to the side of the beam which has the word "cub" on it. Thanks
 
One way to tell. The CUB 194 plow has a "Kink" in the plow beam,while the 194 plow does not.Older units had CUB stamped in that "Kinked" beam as well.Did you get the coulter unit?? They also are different between the CUB and 100/130/140 models.(You"ll notice that "Kink" standing behind the plow unit).Maybe that later production models of the 194 were the same,I am more familiar with the early versions,the ones without the tag riveted to the RH side of the beam.Hope this helps!!
 
The numbers you gave are correct. I have both kinds, including one configured just like the one you are looking at to buy. I bought it at an auction along with other one point implements; the tractor there was a 140. I think you will be fine with that plow. I believe in going by the part number rather than the riveted tag in this case.
 
Frankly I think it would work fine regardless.

Most of the difference is the Cub beam is shorter due to the Cub's lower ground clearance compared to a 140.
 
You must log in or register to reply here.

Similar threads

A
1974 IH 140 manual part number
Replies
5
Views
216
BarnyardEngineering
BarnyardEngineering
B
Fast Hitch Disc Settings
Replies
4
Views
293
Bill VA
B
P
Cub Loboy front snow plow hook up question
Replies
4
Views
329
formerly ny bill
formerly ny bill
L
Fast hitch plow identification
Replies
4
Views
287
WESnIL
W
R
Brazing Nut onto Stripped Farmall 140 Steering Box Mounting Hole
2
Replies
26
Views
1K
RTR
R
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top