Super H cam gear

Resealing the front cover and plate on my Super H and am going back togeather today. Looked in some books but can't find a torque spec. for the nut on the cam shaft that holds the gear in place. Anyone have any ideas? Thanks
 
What's the hex size of the retaining nut. Does it have fine threads? Hal
PS: Measure the diameter of the threaded area on the cam.
 
End of the cam shaft is 1". Outside of the nut is 1 1/2". Fine thread. The threads on the crank are 1 1/8" fine tread and I think the torque on nut for the pulley is 140 ftlbs.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top