Loader for 300U

Dave H (MI) · Feb 17, 2013

Would anyone happen to know of a factory loader designed to fit on the 300 utility? Fay has a picture on page 57 of the book covering number series tractors and I have seen this loader on a tractor but only remember it saying "McCormick" on it. Anyone know the model number? I have a search set up to locate one for my tractor but I am getting too many bad hits and want to narrow down the search.

old · Feb 17, 2013

Hope you have power steering LOL. I have a loader here that would probably fit a 300U but since the 300U we have does not have power steering and it is a bear to steer we have not put it on. I tried it on an H but the H was to long for it to fit so the 300U seems to be about right

r aiken · Feb 17, 2013

Here is my 300U with loader. I would sell the loader, in Ohio

r aiken · Feb 17, 2013

try agin

[/img]

Dave H (MI) · Feb 17, 2013

Is there a name/model number on that? It would help me in my search. As far as selling it goes, I think my e-mail is open. Shoot me a note so we are not on the forum.

Dave H (MI) · Feb 17, 2013

can't get e-mail to stay open so you can contact me at h a g e c p a AT a o l DOT c o m. Throw a post back on here if you don't get through to me with your contact info and we can talk about it. That looks like the McCormick loader I saw on one of the sale tractors I looked at a while back.

MARK ROBKE · Feb 17, 2013

The loader you seek is model u-34. Mr r aiken's pic is the correct one, except it is a trip bucket. Our's was a hydraulic bucket; you need the factory hydraulic's to hook it up properly : 2 'touch control' remotes; the block on the r/s for 3 hose hook ups and the 1 on the left.Mark

Anonymous-0 · Feb 17, 2013

I have a 350 Utility and loader that has a loader that looks like the picture also. I did not see any model # on it. only McCormick. I would also like to find the model #. My unit has been restored and am asking $4,500.00 for it.

Dave H (MI) · Feb 17, 2013

I was looking at his picture and it looked an awful lot like a trip bucket to me too. The one I saw here locally was a hydraulic bucket. Don't know if you can convert a trip rope arrangement to a cylinder but now I am remembering the cylinder brackets on the one I looked at were home made so I am thinking he added that on. Thanks for the info!

r aiken · Feb 17, 2013

just sent you an email

AJB-830 · Feb 17, 2013

Dave, The attached picture shows my factory original U-34 loader on my 300 utility with the 2-way hydralic bucket. The 2nd picture is a restored U-34 loader on a 350. Al

realolman · Feb 17, 2013

I have a IH 2001 loader on mine works good looks nice

yeah... I know it's painted like a 350... I guess the guy who had it before me liked it that way... I do too actually... but it is a 300

Dave H (MI) · Feb 17, 2013

Got it! I'll get back with you tomorrow.

Dave H (MI) · Feb 17, 2013

Good pictures, thanks much! Gives me a good idea of what I am looking for.

Dave H (MI) · Feb 17, 2013

Definitely would work as an alternative. I have seen a LOT of 300U's with 350 paint schemes. Mine is all original and I am going to leave it that way but most of the 300's I have seen have had parts repainted white. One even had white doglegs which was not part of either model. I have seen this in the N Fords also. Lot of older tractors got new two tone paint jobs when the 8N came out. It's your tractor, it should look the way you like it.

Loader for 300U

Dave H (MI)

Well-known Member

old

Well-known Member

r aiken

Member

r aiken

Member

Dave H (MI)

Well-known Member

Dave H (MI)

Well-known Member

MARK ROBKE

Well-known Member

Anonymous-0

Well-known Member

Dave H (MI)

Well-known Member

r aiken

Member

AJB-830

Member

realolman

Member

Dave H (MI)

Well-known Member

Dave H (MI)

Well-known Member

Dave H (MI)

Well-known Member

Similar threads