|
| |
| Farmall & IHC Tractors Discussion Forum |
Topic: Generator leaking oil
[Return to Forum]
| Author |
[Modern View]
|
| Dan MD
01-26-2013 13:44:09
69.179.19.92
|
My generator always leaks oil after I oil it, especially out the rear. I took it off the tractor today and took a good look at it. Is there supposed to be a weep hole for the oil to drain out the bottom of the rear bushing cover? Is the front the same?Thanks, Dan |
|
|
| Dennis K (WA)
01-26-2013 19:28:38
24.21.78.195
|
|
Re: Generator leaking oil in reply to Dan MD, 01-26-2013 13:44:09
|
|
| Should be a weep hole in the cover and yes it will leak if over oiled.
Delco generators
Dennis |
|
|
| Dan MD
01-26-2013 18:37:56
69.179.19.92
|
|
Re: Generator leaking oil in reply to Dan MD, 01-26-2013 13:44:09
|
|
| | Well I took the back cover off and everything is in place. It looks like the gasket was bad and what was leaking. Thanks, Dan |
|
|
| teddy52food
01-26-2013 17:17:13
184.94.175.179
|
|
Re: Generator leaking oil in reply to Dan MD, 01-26-2013 13:44:09
|
|
| Take the 3 screws out & remove that cover. See if there is a long round felt wick in there. If not, get one put in. |
|
|
| Tom Fleming
01-26-2013 14:08:24
67.20.233.75
|
|
Re: Generator leaking oil in reply to Dan MD, 01-26-2013 13:44:09
|
|
| there should be a small felt in the oiler hole. Yes, I believe there should also be a weep hole opposite the oiler as well.
2-3 drops to saturate the felt. no more. |
|
|
| Dan MD
01-26-2013 14:01:03
69.179.19.92
|
|
Re: Generator leaking oil in reply to Dan MD, 01-26-2013 13:44:09
|
|
| | Is there supposed to be a drain or weep hole on that back cover? Mine has a hole. I only put in a few drops, but it leaks all over out the back. There isn't oil all over under the commutator/brush cover. |
|
|
| rustred
01-26-2013 13:59:22
209.115.232.65
|
|
Re: Generator leaking oil in reply to Dan MD, 01-26-2013 13:44:09
|
|
| if you put 1 drop in should have 0 drops leaking out. generatore are different, some have a felt to catch the oil, some just a brass bushing. biggest thing just lightly oil the bushings. |
|
|
| Tom Fleming
01-26-2013 13:54:27
67.20.233.75
|
|
Re: Generator leaking oil in reply to Dan MD, 01-26-2013 13:44:09
|
|
| There are no seals on the bushings. 2-3 drops of oil is all it takes.
If you get the oil on the commutator it will carbon up. possibly catch fire. It can also soften the varnish on the windings and cause a short. Attract dirt/dust. List goes on.
2-3 drops every 30 days. |
|
|
| Harvey 2
01-26-2013 13:49:18
74.128.149.135
|
|
Re: Generator leaking oil in reply to Dan MD, 01-26-2013 13:44:09
|
|
| Sounds like you are putting too much oil in it. I have been told that too much oiling is bad as not enough. |
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|