(800) 853-2651
SHOP NOW

What Does this Part Fit??

R

RTR

Well-known Member
I realize these wheels fit a mower (possibly a Woods); but which one? Is it one for a Cub Cadet garden tractor, a Numbered Cub LoBoy, a Cub tractor, or a Super A-140 tractor? They look to be NOS to me, as they came with a bunch of NOS parts....with the exception of a missing tire.

Below is a picture of the 2 parts. I also pictured a Woods 59 Mower that came off of a Farmall 140. The wheels and forks look the same as the Woods 59, but the brackets are different looking.

Please help me figure out what these fit....whether it's all the above, or none. THANKS
13623.jpg
13624.jpg
 

Not sure. They are the color of the woods 59 mower. And the color of the IH White/Cream. The whole thing looks identical to the ones on the 59 I have pictured too, but the bracket with the holes in it isn't on the 59. I wonder if they'd fit the 59 if that bracket was removed?? They look the same to me otherwise.

Maybe someone else on here has seen these before and would know if they'd fit.
 
These wheels are too small to be for any finishing
mower I have seen. They even look small for an out
front Grass Hopper. They look more like they would
fit a "Walk Behind" type mower not more than about
32" wide.
 
Used on the Danco built C-1,C-2,and C-3 center mounted rotary mowers,used with the Cubs and Super "A" through the 140 series.
 
Agree - I have two of those mowers. One is for a Farmall A I have and the other is for an 8N I have. The ones on the A are the exact same tire tread but the bracket looks a little different. That bracket does look a little finish mower-like.
 
(quoted from post at 20:05:40 01/09/13) Looks like wheels on the belly mower I have on my Cub 154.

Larry Hardesty
Click to expand...

All of you guys are right. They do look like all of those wheels. However, the brackets with the holes are what confuse me. I don't recognize the brackets.
 
I double checked and it is the mower deck on my International A that has the brackets and wheels like you showed. The wheels fit on the front of the deck, and the holes are used to adjust the wheels up and down (e.g. the mower level). I do not recall the model of the mower deck, but I think it is of IH manufacture.
 
Here is a picture off the Yesterday's Tractors site as to the mower the brackets and wheels fit. I checked on my but no number, but it has an International sticker still on it.


https://photos.yesterdaystractors.com/contents/adpic9640.htm
 
You must log in or register to reply here.

Similar threads

P
Older style Cub low boy
Replies
7
Views
669
tn terry t
tn terry t
D
another fine mess
Replies
9
Views
499
Rich'sToys
R
P
Decided on the Cub Loboy
Replies
9
Views
612
Jim Becker
J
P
Questions about a Cub. I'm considering
Replies
7
Views
400
BarnyardEngineering
BarnyardEngineering
R
Cub 174 with IH duplex hopper
Replies
8
Views
403
Robert Paddock
R
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top